High Air Flow Rate Box HEPA Filter for Industrial HVAC System

Air Pressure drop and air flow rate data Sheet:

Pressure drop range: ±15%

According to clients` requirements offer different specifications

The installation for High Air Flow Box HEPA filter

1. Air filters should be installed in normal temperature, normal pressure and normal humidity environment; If the conditions are not well, that will influence performance of HEPA filters.
2. Before installation, please check if the air filters is deformed or broken; please check the filter media if it`s complete without any broken;
3. Pay attention to the gasket make sure air filters and install frame is air tight;
4. Clean the HVAC system tunnel make sure no rust, dust and other fine particles;
5. Make sure the air flow direction are same between HVAC tunnel and air filters;
6. Don`t hold the filter media, please hold the filter frame when install the filters;

The application for high air flow Box HEPA filters;

1. High airflow required HVAC system terminal filtration;
2. Replacement for HEPA filter with separators;
3. Variable airflow system;
4. High moist ventilation system that pocket filters cannot be used;
5. Commercial buildings HVAC system such as hospital, school, library, airport and so on;
6. Terminal HEPA filter for cleanrooms in LED, micron electrical, pharmaceutical, food processing, optical, painting, medicine manufacturing and so on;

Description

Filter media: glass fiber. ( HV company )

Frame: gal steel

Efficiency: H10, H11, H12, H13, H14 ( EN: 1822 )

Usage environment: highest temp 80℃, humidity 80%

Initial pressure drop:

Recommend final pressure drop: 600Pa

Separator: hot-melt glue

Gasket: EVA Neoprene

Sealant: polyurethane

Face guard: painted metal mesh ( if required )

Applications: final filter for clean room air ventilation system, pharmaceuticals, laboratory, hospital, electronic industry and so on.

XNGK is the professional manufacturer for air filters in Shenzhen China, our main product is Pre Panel Filter, Pre Pleated Filter, Pocket Filter, V Bank Filter, HEPA Filter, ULPA Filter, High Temperature Oven HEPA Filter, Laminar Flow Hoods, Pass Box, Air Shower, Fan Filter Unit, Clean Booth for Pharmaceutical, Food processing, Micron electronics, Hospital Cleanroom, and other commercial buildings such as airport, schools, libraries, supermarket; we also offer customized OEM service for air purifier filters, new fresh air system.

We have very strict quality control system, before production, we will test all the row material especially the glass fiber material. To make sure the pressure drop, efficiency and dust holding ability is reliable. After we make the HEPA filters, we will test if the HEPA filter get leakages by MPPS 1882 standard. We promise all the HEPA filters are without leakage and good performance. The glass fiber is made by HV company, their high quality glass fiber ensure our HEPA filters are quite good quality.

Our Production Equipment